CHINA SURPLUS RESOURCE & SELECTION DESK · STATIONARY MINING EQUIPMENT ONLY (HS 8474)
Beneficiation Selection//7 min read

Selecting Used Beneficiation Equipment by Ore Type: Gold, Copper, Lithium, Iron & Chrome

Which downstream separation machines deliver the highest ROI when bought second-hand in China—and which wear internals should always be replaced new prior to export.

EXECUTIVE SUMMARY

Downstream mineral separation units—especially XCF/KYF flotation banks, wet drum and high-gradient VPHGMS magnetic separators, high-rate thickener mechanisms, and automatic chamber filter presses—offer strong CapEx savings when sourced used from Chinese concentrators, provided soft wear internals (polyurethane impellers, filter cloths, jig diaphragms, and slurry pump liners) are refreshed brand new before export.

In This Guide
  1. 1. Flotation Cells: Why XCF + KYF Paired Banks Dominate Used Exports
  2. 2. Magnetic Separators: Gauss Testing & Coil Insulation Are Mandatory
  3. 3. Thickeners & Filter Presses: Cut Ocean Freight by Shipping Smart

Used Separation Equipment Selection by Mineralogy

Ore BodyCore Used Equipment to SourceKey Technical VerificationConsumables to Fit Brand New
Hard-Rock / Sulfide GoldCentrifugal concentrators, double-impeller CIL agitators, SF/KYF flotation cellsTank corrosion thickness, shaft straightness, reducer gear noiseImpellers, stators, inter-stage carbon screens
Copper / Lead-Zinc / Spodumene LithiumCombined XCF (self-aspirating) + KYF (air-forced) flotation banksTank welds, air blower pressure, froth paddle drivesWear-resistant polyurethane rotors/stators & air valves
Magnetite & Hematite Iron / IlmeniteWet drum magnetic separators (CTB) & vertical ring high-gradient (VPHGMS)Surface Gauss meter reading, coil Megger insulation testStainless matrix rods, drum rubber lining, scraper blades
Tailings & Concentrate DewateringCenter-drive thickeners & automatic hydraulic chamber filter pressesFilter beam flatness, 20 MPa hydraulic cylinder pressure test, rake torquePolypropylene filter cloths & damaged plate replacements

1. Flotation Cells: Why XCF + KYF Paired Banks Dominate Used Exports

In 300–1,500 TPD copper, lead-zinc, gold-sulfide, and lithium spodumene circuits, China’s secondary market offers abundant XCF (self-aspirating) and KYF (air-forced) flotation banks from 4 m³ to 24 m³ per cell. Because flotation tanks are heavy steel weldments, sandblasting, marine epoxy recoating, re-balancing drive shafts, and fitting 100% new polyurethane impellers and stators restores near-new metallurgical performance at a fraction of new OEM cost.

2. Magnetic Separators: Gauss Testing & Coil Insulation Are Mandatory

For strongly magnetic magnetite, wet drum separators (CTB series) require verifying permanent magnet flux density (Gauss) across the full drum width. For weakly magnetic hematite, ilmenite, manganese, or quartz iron-removal, vertical ring pulsating high-gradient magnetic separators (VPHGMS) are among China’s strongest export technologies—just confirm excitation coil insulation resistance, cooling water jackets, and DC rectifier cabinet stability before shipping.

3. Thickeners & Filter Presses: Cut Ocean Freight by Shipping Smart

Never pay ocean freight to ship empty steel tank volume for a Φ12m–Φ24m thickener. Experienced buyers source the refurbished center drive head, hydraulic automatic rake-lifting mechanism, truss bridge, feedwell, and rake arms from China—fitting neatly into 1–2 standard 40HQ containers—while pouring a local concrete tank on site. For dry-stack tailings, automatic hydraulic chamber filter presses (100–400 m²) refurbish cleanly with new cloths and hydraulic seals.

Metallurgy First, Machinery Second

Never buy flotation cells or magnetic separators before confirming ore liberation size and bench-scale test results. Sharing your basic assay and desired concentrate grade lets us right-size cell retention time and magnetic field intensity before shortlisting units.

Frequently Asked Questions

Can used flotation cells handle corrosive reagents or high-salinity process water?

Yes, provided the stripped steel tanks are lined with heavy marine-grade epoxy or rubber lining during refurbishment and matched with wear- and corrosion-resistant polyurethane impellers and stators.

CONTINUE READING